Juniper Networks E320 Benutzerhandbuch

LM-10 Uplink Line Module

ES2 10G UPLINK LM

Module label

■

Not applicable

Number of ports

■

First supported: 7.2.0

Software release

■

150 W

■

Acts as frame forwarding engines for the physical interfaces

■

Processes up to 10 Gb of data traffic

■

Pairs with ES2–S2 10GE PR IOA only

■

In a SRP-100 configuration, it must be installed in a turbo slot only (slot 2 or slot 4)

■

If you install the line module in a slot other than slot 2 or slot 4, it will be disabled

■

If you install a LM-10 Uplink module next to a configured line module that is
already installed in slot 3 or slot 5, the LM-10 Uplink module will be disabled

■

If you install a line module in slot 3 or slot 5 next to a previously installed LM-10
Uplink module, the non-LM-10 Uplink module will be disabled

■

In a SRP-320 configuration, it can be installed in any slot

Description

■

Supports a line rate of 128–byte frames on IOAs

■

The 100–Gbps switch fabric allocates 3.4 Gbps of overall bandwidth to each regular
line module slot and 10 Gbps of overall bandwidth to each of the turbo slots (slot 2
and slot 4).

■

The 320–Gbps switch fabric allocates 10 Gbps of overall bandwidth to each line module
slot.

■

See JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules for more
information.

Capability

■

Not applicable

Software features

■

Not applicable

Line module compatibility

■

SRP-100

■

SRP-320

SRP module compatibility

■

Yes (Redundancy IOA must be installed in either slot 0 or slot 11)

■

Can only backup another ES2 10G UPLINK LM

Line module redundancy
compatibility

■

Not applicable

Port redundancy support

■

Not applicable

Cables and connectors

LM-10 Uplink Line Module

■

LM-10 Uplink Line Module