Juniper Networks MX960 Benutzerhandbuch
Table 5: Additional Books Available Through http://www.juniper.net/books (continued)
Description
Book
Provides an overview of Multiprotocol Label Switching (MPLS) applications (such as Layer 3
virtual private networks [VPNs], Layer 2 VPNs, virtual private LAN service [VPLS], and
pseudowires), explains how to apply MPLS, examines the scaling requirements of equipment
at different points in the network, and covers the following topics: point-to-multipoint label
switched paths (LSPs), DiffServ-aware traffic engineering, class of service, interdomain traffic
engineering, path computation, route target filtering, multicast support for Layer 3 VPNs, and
management and troubleshooting of MPLS networks.
virtual private networks [VPNs], Layer 2 VPNs, virtual private LAN service [VPLS], and
pseudowires), explains how to apply MPLS, examines the scaling requirements of equipment
at different points in the network, and covers the following topics: point-to-multipoint label
switched paths (LSPs), DiffServ-aware traffic engineering, class of service, interdomain traffic
engineering, path computation, route target filtering, multicast support for Layer 3 VPNs, and
management and troubleshooting of MPLS networks.
MPLS-Enabled Applications
Explores the full range of characteristics and capabilities for the two major link-state routing
protocols: Open Shortest Path First (OSPF) and IS-IS. Explains architecture, packet types, and
addressing; demonstrates how to improve scalability; shows how to design large-scale networks
for maximum security and reliability; details protocol extensions for MPLS-based traffic
engineering, IPv6, and multitopology routing; and covers troubleshooting for OSPF and IS-IS
networks.
protocols: Open Shortest Path First (OSPF) and IS-IS. Explains architecture, packet types, and
addressing; demonstrates how to improve scalability; shows how to design large-scale networks
for maximum security and reliability; details protocol extensions for MPLS-based traffic
engineering, IPv6, and multitopology routing; and covers troubleshooting for OSPF and IS-IS
networks.
OSPF and IS-IS: Choosing an
IGP for Large-Scale Networks
IGP for Large-Scale Networks
Provides a brief history of the Internet, explains IP addressing and routing (Routing Information
Protocol [RIP], OSPF, IS-IS, and Border Gateway Protocol [BGP]), explores ISP peering and
routing policies, and displays configurations for both Juniper Networks and other vendors'
routers.
Protocol [RIP], OSPF, IS-IS, and Border Gateway Protocol [BGP]), explores ISP peering and
routing policies, and displays configurations for both Juniper Networks and other vendors'
routers.
Routing Policy and Protocols
for Multivendor IP Networks
for Multivendor IP Networks
Provides the insight and practical solutions necessary to understand the IS-IS protocol and how
it works by using a multivendor, real-world approach.
it works by using a multivendor, real-world approach.
The Complete IS-IS Protocol
Requesting Support
For technical support, open a support case with the Case Manager link at
or Mexico) or 1-408-745-9500 (from elsewhere).
Revision History
19 October 2007—530-017577-01 Revision 2. Corrected the DPC slot range supported
by power supplies
by power supplies
PEM0
and
PEM2
.
12 March 2007—530-017577-01 Revision 1.
Copyright © 2007, Juniper Networks, Inc. All rights reserved.
Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other
countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service
marks are the property of their respective owners.
countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service
marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or
otherwise revise this publication without notice.
otherwise revise this publication without notice.
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed
to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347,
6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347,
6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
16
■
Requesting Support
MX960 Ethernet Services Router DC Power Supply Installation Instructions