Polycom 4300T Benutzerhandbuch
Appendix
Appendix - 5
V2IU A
1.
Setup the Network settings.
a
LAN interface IP address = 192.168.2.1
b
LAN interface subnet = 255.255.255.0
c
WAN interface IP address = 69.52.177.69
d
WAN interface subnet = 255.255.255.0
e
Default Gateway = 69.52.177.1
2.
Setup the VoIP ALG – H323 settings
V2IU A is set to use a LAN side gatekeeper, which is 192.168.2.80
V2IU A is set to use a LAN side gatekeeper, which is 192.168.2.80
a
Gatekeeper Mode = LAN/Subscriber side gatekeeper
b
LAN / Subscriber side Gatekeeper Address = 192.168.2.80
Gatekeeper A
1.
On the Path Navigator A, setup the IP configuration as
a
IP address = 192.168.2.80
b
Subnet mask = 255.255.255.0
c
Default Gateway = 192.168.2.1
2.
Setup two Neighboring Gatekeeper profiles.
(Configuration – Neighboring Gatekeeper – Neighbors – Add)
a
In the Add Neighbor Gatekeeper dialog box, add the IP address of the
LAN side V2IU A ( 192.168.2.1 ). Click OK.
a
In the Add Neighbor Gatekeeper dialog box, add the IP address of the
Path Navigator on the public network , GK X (67.100.100.100). Click
OK.
Gatekeeper X
1.
Setup the Neighbor Gatekeeper profile.
(Configuration – Neighboring Gatekeeper – Neighbors – Add)
In the Add Neighbor Gatekeeper dialog box, add the IP address of the
In the Add Neighbor Gatekeeper dialog box, add the IP address of the
WAN side V2IU A (69.52.177.69). Click OK.
Note
The reason for setting up the Neighboring statement with the LAN side of the V2IU
A is to enable outbound dialing from standalone endpoints on the public network.
A is to enable outbound dialing from standalone endpoints on the public network.