Proxim 70443r2 Benutzerhandbuch

Tsunami QuickBridge II T1/E1 Quick Install Guide

3. Connect the RJ45 connector on the interface cable to the RJ45 port on the back of the radio. Hand-tighten

the connector nut; do not use the wrench to tighten the connector. Connect the other end of the interface
cable to the Power & Ethernet Adapter.

4. Connect an RJ45 connector from a standard CAT 5 or CAT 5e cable (not supplied) to the RJ45 port on

the Power & Ethernet Adapter. Connect the other end of the cable to a switch/hub on your network or
directly to a PC.

To directly connect the radio to a PC, use a straight-through Ethernet cable between the network interface
card in the PC and the RJ45 port on the power & Ethernet adapter.

WARNING! The maximum length of the CAT 5 cable allowed between the radio unit and the power & Ethernet

adapter is 75 meters. If you are connecting the radio through a hub or switch, the maximum
length of the two CAT 5 cables is 75 feet; for example, if the cable between the radio and the
power supply is 50 feet, the cable between the power & Ethernet adapter and the PC can be only
25 feet, for a total length of 75 feet.