Proxim 70443r2 Benutzerhandbuch

4. The Choose Install Folder screen is displayed.  The recommended installation directory is C:\Program 

Files\QuickBridge Manager 2.1.  Click Next when you have made your selection or to accept the default 
folder. 

5. The 

Choose Shortcut Folder screen is displayed; click Next when you have made your selections or to 

accept the default folder. 

6. The 

Pre-Installation Summary screen is displayed; click the Install button to install the configuration 

software. 

7.  When installation is complete, the following window is displayed; click the Done button to exit the installation 

program. 

 

Before configuring the QuickBridge II with the Manager program, you must: 

•  Have completed “Step 6.  Install the Software”   

•  Change the PC’s IP address to fall within the radio’s subnet 

•  Connect the PC 

•  Apply power to both units 

These tasks are covered in the following procedure: 

1.  Change the PC’s IP address to 192.168.20.75 (or a similar address in the same subnet).  Use a subnet 

mask of 255.255.255.0.  This change is only temporary.  Later, you will be able to change the IP address of 
the QuickBridge II unit and return your PC to its original IP address. 

•  The IP address of the PC must be in the3 same subnet as the QuickBridge unit in order to use the 

QuickBridge Manager for configuration. 

•  The Master (or Primary) unit is configured at the factory with a default IP address of 192.168.20.56.  

The Slave (or Secondary) unit is configured with a default IP address of 192.168.20.51. 

9