Toshiba 6000 Series Benutzerhandbuch

212

If Something Goes Wrong
Resolving a hardware conflict

Make sure the drive tray has closed properly. Press gently until it 
clicks into place.

Open the drive tray and remove the disc. Make sure the drive tray 
is clean. Any dirt or foreign object can interfere with the laser 
beam.

Examine the disc to see whether it is dirty. If necessary, wipe it 
with a clean damp cloth dipped in water or a neutral cleaner.

Replace the disc in the tray. Make sure it is lying flat, label side 
uppermost. Press the disc down until it locks on the spindle. Close 
the drive tray carefully, making sure it has shut completely.

Make sure the computer is connected to a power source and turned 
on. The DVD-ROM or DVD-ROM/CD-RW drive eject 
mechanism requires power to operate.

To remove a disc without turning on the computer, use a narrow 
object, such as a straightened paper clip, to press the manual eject 
button. This button is in the small hole next to the disc eject button 
on the right side of the computer.

If the problem is with an application CD-ROM, refer to the 
software’s documentation and check that the hardware 
configuration meets the program’s needs.

WinDVD

™

 has been configured to provide optimum performance 

and quality based upon your system’s available resources.