Toshiba M20 Benutzerhandbuch
28
Your computer’s TFT display
RG 5.375 x 8.375 ver 2.3.3
Pulling the clips away from the memory module
3
Carefully remove the module from the slot.
4
Replace the cover plate and screws.
5
Turn the computer over and restart it.
Your computer’s TFT display
Small bright dots may appear on your TFT display when you
turn on your computer. Your display contains an extremely
large number of thin-film transistors (TFT) and is
manufactured using high-precision technology. Any small
bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.
turn on your computer. Your display contains an extremely
large number of thin-film transistors (TFT) and is
manufactured using high-precision technology. Any small
bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.
Inserting and removing PC Cards
Your Satellite M20 Series computer comes with two stacked
PC Card slots and supports three types of PC Cards:
PC Card slots and supports three types of PC Cards:
❖
Type I cards—You can install up to two of these cards,
one in each slot.
one in each slot.
❖
Type II cards—You can install up to two of these cards,
one in each slot.
one in each slot.
❖
Type III cards—You can install just one of these cards.
Inserting a PC Card
Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before
you insert it.
comes with the card to see if you need to do anything before
you insert it.
When preparing to insert a PC Card, there are three methods:
❖
Turn off the computer and follow the steps below.