Atlantis Land A02-RB-W54_GE01 Benutzerhandbuch

                               Wireless Broadband Router

 

                                                                                     7 

100Mbps. 

Connect an UTP Ethernet cable to 
one of the four LAN ports when 
connecting to a PC or an 
office/home network of 10Mbps or 
100Mbps. 

There is one 2dBi Gain Antenna 
in the rear panel for wireless 
connection. 

After the device has turned on, 
press it to reset the device or 
restore to factory default settings. 
Use a pin-shape item to push to 
reset this device to factory default 
settings. It will be useful too when 
the manager forgot the password 
to login, but the setting will be 
back to default setting. 

Plug in one end of the network cable to the WAN port of the 
Wireless Internet Broadband Router. 
Plug in the other end of the network cable to the Ethernet 
port of the xDSL or Cable modem (E.G A02-RA141 or A02-
RA111). 
Use another network cable to connect to the Ethernet card 
on the computer system; the other end of the cable connects 
to the LAN port of the Internet Broadband Router. Since the 
Wireless Broadband Router has four ports, you can connect 
up to four computers directly to the unit. There you do not 
have to buy a switch to connect these computers since one