Avaya X330WAN Benutzerhandbuch
Layer 3 CLI Commands
Avaya X330WAN User’s Guide
193
ping
Use the
ping
command to check host reachability and network connectivity.
Syntax
ping
<host> [<interval> [<size>[timeout[source address]]]]
Parameters
Example
X330WAN-2DS1-1(configure)# ping 192.168.49.1
ping 192.168.49.1 3
ping 192.168.49.1 3 50
ping 192.168.49.1 3 50 2
ping 192.168.49.1 3 50 2 192.168.49.4
redistribute (Router-OSPF context)
Use the
redistribute
command to redistribute routing information from other
protocols into OSPF. The no form of this command disables redistribution by
OSPF.
OSPF.
Syntax
[no] redistribute
<protocol>
Parameters
Example
X330WAN-2DS1-1(configure router:ospf)# redistribute static
host
IP address of the target system.
interval
An integer from 1 to 256, representing the number of seconds
between successive ping messages. The default is 1.
between successive ping messages. The default is 1.
size
An integer from 22 to 65500, representing the size of the packet
sent during a ping operation. The default is 50 bytes.
sent during a ping operation. The default is 50 bytes.
timeout
Timeout in seconds (1-10).
source address
IP address.
protocol
One of the following protocols: [static|connected|rip].