Billion Electric Company 7404V Benutzerhandbuch

 

America (N.America), Europe, France, etc. The Channel ID will be different based on this setting. 

Channel ID: Select the wireless connection ID channel that you would like to use.  Use the Scan 
Channel Usage

 to help to select non-occupied wireless channel.   

  Scan Channel Usage: Wireless channel scan takes up to 14 seconds to survey the channel ID 

in the network area.    The result will show all ID channel is being occupied or not occupied.         

Note: Wireless performance may degrade if select ID channel is already being occupied by other AP(s).   

TX PowerLevel:  It is function that enhances the wireless transmitting signal strength.  User may 
adjust this power level from minimum 0 up to maximum 255.     

Note: The Power Level maybe different in each access network user premises environment and choose the most 
suitable level for your network.       

Connected:   Representing in true or false. That it is the connection status between the system and the 
build-in wireless card. 

AP MAC Address: It is a unique hardware address of the Access Point.     

AP Firmware Version: The Access Point firmware version.   

It is a wireless access point mode that enables wireless link and communication with other access point.   
It is easy to be installed simply define peer’s MAC address of the connected AP. WDS takes advantages 
of cost saving and flexibility which no extra wireless client device is required to bridge between two 
access points and extending an existing wired or wireless infrastructure network to create a larger 
network. It can connect up to 4 wireless APs for extending cover range at the same time. 

In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must be the 
same for both access points.     

WDS Service: The default setting is Disabled. Check Enable radio button to activate this function.   

1. Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important that your peer’s AP 
must include your MAC address in order to acknowledge and communicate with each other.     

2. Peer WDS MAC Address: It is the second associated AP’s MAC Address.     

3. Peer WDS MAC Address: It is the third associated AP’s MAC Address.   

4. Peer WDS MAC Address: It is the fourth associated AP’s MAC Address.     

Note: For MAC Address, Semicolon ( : ) must be included. 

34