ZyXEL Communications P-660RU-Tx Benutzerhandbuch

Seite von 238
Chapter 9 Static Route
P-660RU-Tx User’s Guide
86
9.2  The Routing Table List Screen
Use this screen to view the static route rules. Click Advanced Setup > Routing 
to display the following screen.
Figure 32   Advanced Setup > Routing Table List
The following table describes the labels in this screen. 
Table 19   Advanced Setup > Routing Table List
LABEL
DESCRIPTION
#
This is the number of an individual static route.
Dest IP
This parameter specifies the IP network address of the final destination. 
Routing is always based on network number.
Mask
This parameter specifies the IP network subnet mask of the final 
destination.
Gateway IP
This is the IP address of the gateway. The gateway is a router or switch 
on the same network segment as the device's LAN or WAN port. The 
gateway helps forward packets to their destinations.
Metric
This field displays the priority of each route on the P-660RU-Tx.
Device
This is the name that describes or identifies this route. 
Use
This is the number of times the route was used.
Edit
Click this to go to the screen where you can set up a static route on the 
P-660RU-Tx. You cannot edit the default routes.
Drop
Click this to remove a static route from the P-660RU-Tx. You cannot 
delete the default routes.
ADD ROUTE
Click this to add a new static route on the P-660RU-Tx.