ZyXEL Communications P-793H Benutzerhandbuch
P-793H User’s Guide
63
C
H A P T E R
4
Point-to-(2)point Configuration
This chapter introduces point-to-point and point-to-2point connections.
4.1 Point-to-point Connection Overview
You can set up point-to-point connection between two ZyXEL Devices. These connections
offer a cost-effective, high-speed connection for high-bandwidth applications such as
videoconferencing and distance learning. An example is shown below.
offer a cost-effective, high-speed connection for high-bandwidth applications such as
videoconferencing and distance learning. An example is shown below.
Figure 21 Example: Point-to-point Connection
In a point-to-point connection, the DSL ports on the ZyXEL Devices are directly connected to
each other, not to an ISP or the Internet.
each other, not to an ISP or the Internet.
"
A point-to-point connection can use RFC 1483 in bridge mode or ENET
ENCAP in router mode.
ENCAP in router mode.
"
In a point-to-point connection, the ZyXEL Devices should use the same VPI,
VCI, multiplexing, and encapsulation method.
VCI, multiplexing, and encapsulation method.