ZyXEL Communications NBG420N Benutzerhandbuch
Chapter 6 Tutorials
NBG420N User’s Guide
83
Figure 50 VPN Summary
6.2.2 Configuring Jack’s NBG420N VPN Settings
To configure these settings Jack uses the NBG420N web configurator.
1 Log into the NBG420N web configurator and click VPN > Modify icon. This displays
the VPN Rule Setup (basic) screen.
2 Select the Active checkbox to enable the VPN rule after it has been created. Make sure
IKE is selected as the IPSec Keying Mode.
Figure 51 Property
3 Enter the IP address “10.0.0.7” in the Local Address text box. This is the IP address of
Jack’s computer. Enter the IP address “10.0.0.7” in the Local Address End/Mask text
box. This value is the same as Jack only wants Bob to access this single IP address.
box. This value is the same as Jack only wants Bob to access this single IP address.
Figure 52 Local Policy
4 Enter the IP address “192.168.1.35” in the Remote Address Start text box. This is the
IP address of Jack’s computer. Enter the IP address “192.168.1.35” in the Remote
Address End/Mask text box. This value is the same as Bob only wants Jack to access
this single IP address.
Address End/Mask text box. This value is the same as Bob only wants Jack to access
this single IP address.
Figure 53 Remote Policy
5 Enter the IP address “2.2.2.2” in the My IP Address text box. This is Jack’s WAN IP
address.