ZyXEL Communications NWA1100-N Benutzerhandbuch
Chapter 12 Remote Management
NWA1100-N User’s Guide
117
12.8.3 SNMP Traps
SNMP traps are messages sent by the agents of each managed device to the SNMP manager. These
messages inform the administrator of events in data networks handled by the device. The NWA can
send the following traps to the SNMP manager.
messages inform the administrator of events in data networks handled by the device. The NWA can
send the following traps to the SNMP manager.
Some traps include an SNMP interface index. The following table maps the SNMP interface indexes
to the NWA’s physical and virtual ports.
to the NWA’s physical and virtual ports.
Table 41
SNMP Traps
TRAP NAME
OBJECT IDENTIFIER #
(OID)
DESCRIPTION
Generic Traps
coldStart
1.3.6.1.6.3.1.1.5.1
This trap is sent after booting (power on).
This trap is defined in RFC-1215.
This trap is defined in RFC-1215.
warmStart
1.3.6.1.6.3.1.1.5.2
This trap is sent after booting (software
reboot). This trap is defined in RFC-1215.
reboot). This trap is defined in RFC-1215.
linkDown
1.3.6.1.6.3.1.1.5.3
This trap is sent when the Ethernet link is
down.
down.
linkUp
1.3.6.1.6.3.1.1.5.4
This trap is sent when the Ethernet link is up.
authenticationFailure
(defined in RFC-1215)
(defined in RFC-1215)
1.3.6.1.6.3.1.1.5.5
The device sends this trap when it receives
any SNMP get or set requirements with the
wrong community (password).
any SNMP get or set requirements with the
wrong community (password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214 and
RFC 1907) must be enabled on in order for
the device to send authenticationFailure
traps. Use a MIB browser to enable or disable
snmpEnableAuthenTraps.
1.3.6.1.2.1.11.30 (defined in RFC 1214 and
RFC 1907) must be enabled on in order for
the device to send authenticationFailure
traps. Use a MIB browser to enable or disable
snmpEnableAuthenTraps.
Traps defined in the
ZyXEL Private MIB.
ZyXEL Private MIB.
whyReboot
1.3.6.1.4.1.890.1.5.13.0.
1
1
This trap is sent with the reason for restarting
before the system reboots (warm start).
before the system reboots (warm start).
"System reboot by user!" is added for an
intentional reboot (for example, download
new files, CI command "sys reboot").
intentional reboot (for example, download
new files, CI command "sys reboot").
If the system reboots because of fatal errors,
a code for the error is listed.
a code for the error is listed.
pwTFTPStatus
1.3.6.1.4.1.890.1.9.2.3.3
.1
.1
This trap is sent to indicate the status and
result of a TFTP client session that has ended.
result of a TFTP client session that has ended.
Table 42
SNMP Interface Index to Physical and Virtual Port Mapping
TYPE
INTERFACE
PORT
Physical
enet0
Wireless LAN adaptor WLAN1
enet1
Ethernet port (LAN)
enet2
Wireless LAN adaptor WLAN2
Virtual
enet3 ~ enet9
WLAN1 in MBSSID mode
enet10 ~ enet16
WLAN2 in MBSSID mode
enet17 ~ enet21
WLAN1 in WDS mode
enet22 ~ enet26
WLAN2 in WDS mode