ZyXEL Communications NWA1100-N Benutzerhandbuch

 Chapter 4 Tutorial

NWA1100-N User’s Guide

In this example, you have been using your NWA as an access point for your office network (See 
your Quick Start Guide for information on how to set up your NWA in Access Point mode). Now your 
network is expanding and you want to make use of the MBSSID feature (see 

) to provide multiple wireless networks. Each wireless network will cater to a different type of 

user.

You want to make three wireless networks: one standard office wireless network with all the same 
settings you already have, another wireless network with high priority QoS settings for Voice over 
IP (VoIP) users, and a guest network that allows visitors to access only the Internet and the 
network printer.

To do this, you will take the following steps:

Edit the SSID profiles.

Change the operating mode from Access Point to MBSSID and reactivate the standard network.

Configure different security modes for the networks.

Configure a wireless network for standard office use.

Configure a wireless network for VoIP users.

Configure a wireless network for guests to your office.

The following figure shows the multiple networks you want to set up. Your NWA is marked Z, the 
main network router is marked A, and your network printer is marked B.