ZyXEL Communications NWA1100-N Benutzerhandbuch
Chapter 6 Wireless Settings Screen
NWA1100-N User’s Guide
65
6.4.2 Bridge / Repeater Mode
Use this screen to have the NWA act as a wireless network bridge and establish wireless links with
other APs. You need to know the MAC address of the peer device, which also must be in bridge
mode.
other APs. You need to know the MAC address of the peer device, which also must be in bridge
mode.
Rates
Configuration
Configuration
This section controls the data rates permitted for clients.
For each Rate, select an option from the Configuration list. The options are:
•
Basic (1~11 Mbps only): Clients can always connect to the access point at
this speed.
•
Optional: Clients can connect to the access point at this speed, when
permitted to do so by the AP.
•
Disable: Clients cannot connect to the access point at this speed.
MCS Table
The MCS Rate table is available only when 802.11 b/g/n is selected in the
802.11 Wireless Mode field.
802.11 Wireless Mode field.
IEEE 802.11n supports many different data rates which are called MCS rates. MCS
stands for Modulation and Coding Scheme. This is an 802.11n feature that
increases the wireless network performance in terms of throughput.
stands for Modulation and Coding Scheme. This is an 802.11n feature that
increases the wireless network performance in terms of throughput.
For each MCS Rate (0-15), select either Enable (default) to have the NWA use the
data rate. Select Disable if you do not want the NWA to use the data rate.
data rate. Select Disable if you do not want the NWA to use the data rate.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 11
Wireless > Wireless Settings: Access Point (continued)
LABEL
DESCRIPTION