ZyXEL Communications G-1000 Benutzerhandbuch
G-1000 User’s Guide
Chapter 19 System Maintenance and Information
131
Figure 80 Menu 24 System Maintenance
Figure 81 Valid CI Commands
19.2 Time and Date Setting
The G-1000 keeps track of the time and date. There is also a software mechanism to set the
time manually or get the current time and date from an external server when you turn on your
G-1000. Menu 24.10 allows you to update the time and date settings of your G-1000. The real
time is then displayed in the G-1000 error logs.
time manually or get the current time and date from an external server when you turn on your
G-1000. Menu 24.10 allows you to update the time and date settings of your G-1000. The real
time is then displayed in the G-1000 error logs.
1 Select menu 24 in the main menu to open Menu 24 – System Maintenance.
2 Then enter 10 to go to Menu 24.10 – System Maintenance – Time and Date Setting to
update the time and date settings of your G-1000 as shown in the following screen.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
2. System Information and Console Port Speed
4. Diagnostic
5. Backup Configuration
5. Backup Configuration
7. Upload Firmware
8. Command Interpreter Mode
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
11. Remote Management Setup
Enter Menu Selection Number:
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
G-1000> ?
Valid commands are:
sys exit device ether
config wlan ip ppp
bridge hdap cnm radius
8021x
G-1000>
G-1000> ?
Valid commands are:
sys exit device ether
config wlan ip ppp
bridge hdap cnm radius
8021x
G-1000>