ZyXEL Communications G-2000 Plus Benutzerhandbuch

ZyAIR G-2000 Plus User’s Guide

Chapter 28 Network Address Translation (NAT)

296

                 Menu 11.3 - Remote Node Network Layer Options

                    IP Address Assignment= Dynamic
                    IP Address= N/A
                    IP Subnet Mask= N/A
                    Gateway IP Addr= N/A

                    Network Address Translation= SUA Only
                    Metric= 1
                    Private= N/A
                    RIP Direction= None
                      Version= N/A
                    Multicast= None

                     Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Menu 11.3 Applying NAT to the Remote Node

The following table describes the options for Network Address Translation.

Table 101   Applying NAT in Menus 4 & 11.3

NAT

Press [SPACE BAR] and then [ENTER] to select Full Feature if you have multiple 

public WAN IP addresses for your ZyAIR.  The SMT uses the address mapping set that 

you configure and enter in the Address Mapping Set field (menu 15.1 - see section ).

Select None to disable NAT.

When you select SUA Only, the SMT uses Address Mapping Set 255 (menu 15.1 - see 

section ). Choose SUA Only if you have just one public WAN IP address for your 

ZyAIR.

Use the address mapping sets menus and submenus to create the mapping table used to assign 
global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full 
Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT 
will use the pre-configured Set 255 (read only).

The server set is a list of LAN servers mapped to external ports. To use this set, a server rule 
must be set up inside the NAT address mapping set. Please see the section on port forwarding 
in the chapter on NAT web configurator screens for further information on these menus. To 
configure NAT, enter 15 from the main menu to bring up the following screen.