ZyXEL Communications G-2000 Plus Benutzerhandbuch
ZyAIR G-2000 Plus User’s Guide
Appendix E
398
Since the mask is always a continuous number of ones beginning from the left, followed by a
continuous number of zeros for the remainder of the 32 bit mask, you can simply specify the
number of ones instead of writing the value of each octet. This is usually specified by writing
a “/” followed by the number of bits in the mask after the address.
continuous number of zeros for the remainder of the 32 bit mask, you can simply specify the
number of ones instead of writing the value of each octet. This is usually specified by writing
a “/” followed by the number of bits in the mask after the address.
For example, 192.1.1.0 /25 is equivalent to saying 192.1.1.0 with mask 255.255.255.128.
The following table shows all possible subnet masks for a class “C” address using both
notations.
notations.
Table 136 Alternative Subnet Mask Notation
SUBNET MASK IP ADDRESS
SUBNET MASK “1” BITS
LAST OCTET BIT VALUE
255.255.255.0
/24
0000 0000
255.255.255.128
/25
1000 0000
255.255.255.192
/26
1100 0000
255.255.255.224
/27
1110 0000
255.255.255.240
/28
1111 0000
255.255.255.248
/29
1111 1000
255.255.255.252
/30
1111 1100
The first mask shown is the class “C” natural mask. Normally if no mask is specified it is
understood that the natural mask is being used.
understood that the natural mask is being used.
Example: Two Subnets
As an example, you have a class “C” address 192.168.1.0 with subnet mask of 255.255.255.0.
Table 137 Two Subnets Example
NETWORK NUMBER
HOST ID
IP Address
192.168.1.
0
IP Address (Binary)
11000000.10101000.00000001.
00000000
Subnet Mask
255.255.255.
0
Subnet Mask (Binary)
11111111.11111111.11111111.
00000000
The first three octets of the address make up the network number (class “C”). You want to
have two separate networks.
have two separate networks.