ZyXEL Communications USG 2000 Benutzerhandbuch
Chapter 17 Zones
ZyWALL USG 2000 User’s Guide
380
17.3 Zone Edit
The Zone Edit screen allows you to add or edit a zone. To access this screen, go
to the Zone screen (see
to the Zone screen (see
), and click the Add icon or an
Edit icon.
Figure 287 Network > Zone > Add
The following table describes the labels in this screen.
Table 93 Network > Zone > Edit
LABEL
DESCRIPTION
Name
For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You
may use 1-31 alphanumeric characters, underscores(
may use 1-31 alphanumeric characters, underscores(
_
), or dashes (-),
but the first character cannot be a number. This value is case-sensitive.
Block Intra-
zone Traffic
zone Traffic
Select this check box to block network traffic between members in the
zone.
zone.
Member List
Available lists the interfaces and VPN tunnels that do not belong to any
zone. Select the interfaces and VPN tunnels that you want to add to the
zone you are editing, and click the right arrow button to add them.
zone. Select the interfaces and VPN tunnels that you want to add to the
zone you are editing, and click the right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone.
Select any interfaces that you want to remove from the zone, and click
the left arrow button to remove them.
Select any interfaces that you want to remove from the zone, and click
the left arrow button to remove them.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving.