ZyXEL Communications VMG1312-B Benutzerhandbuch
Chapter 6 Broadband
VMG1312-B Series User’s Guide
97
6.5 The 8021x Screen
You can view and configure the 802.1x authentication settings in the 8021x screen. Click Network
Setting > Broadband > 8021x to display the following screen.
Setting > Broadband > 8021x to display the following screen.
Figure 26
Network Setting > Broadband > 8021x
The following table describes the labels in this screen.
PhyR DS
Enable or disable PhyR DS (downstream) for downstream transmission from the WAN.
PhyR DS should be enabled if data being transmitted downstream is sensitive to noise.
However, enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will
require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and
have it enabled.
PhyR DS should be enabled if data being transmitted downstream is sensitive to noise.
However, enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will
require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and
have it enabled.
Apply
Click Apply to save your changes back to the Device.
Cancel
Click Cancel to return to the previous configuration.
Table 12
Network Setting > Network Setting > Broadband (continued)
LABEL
DESCRIPTION
Table 13
Network Setting > Network Setting > 8021x
LABEL
DESCRIPTION
#
This is the index number of the entry.
Status
This field displays whether the authentication is active or not. A yellow bulb signifies that
this authentication is active. A gray bulb signifies that this authentication is not active.
this authentication is active. A gray bulb signifies that this authentication is not active.
Interface
This is the interface that uses the authentication. This displays N/A when there is no
interface assigned.
interface assigned.
EAP Identity
This shows the EAP identity of the authentication. This displays N/A when there is no EAP
identity assigned.
identity assigned.
EAP method
This shows the EAP method used in the authentication. This displays N/A when there is no
EAP method assigned.
EAP method assigned.
Bidirectional
Authentication
Authentication
This shows whether bidirectional authentication is allowed.
Certificate
This shows the certificate used for this authentication. This displays N/A when there is no
certificate assigned.
certificate assigned.
Trusted CA
This shows the Trusted CA used for this authentication. This displays N/A when there is no
Trusted CA assigned.
Trusted CA assigned.
Apply
Click Apply to save your changes back to the Device.
Cancel
Click Cancel to return to the previous configuration.