ZyXEL Communications MES3500-24 Benutzerhandbuch
MES3500-24/24F User’s Guide
144
C
H A P T E R
1 5
Broadcast Storm Control
This chapter introduces and shows you how to configure the broadcast storm control feature.
15.1 Broadcast Storm Control Setup
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure
(DLF) packets the Switch receives per second on the ports. When the maximum number of
allowable broadcast, multicast and/or DLF packets is reached per second, the subsequent packets
are discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your
network. You can specify limits for each packet type on each port.
(DLF) packets the Switch receives per second on the ports. When the maximum number of
allowable broadcast, multicast and/or DLF packets is reached per second, the subsequent packets
are discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your
network. You can specify limits for each packet type on each port.
Click Advanced Application > Broadcast Storm Control in the navigation panel to display the
screen as shown next.
screen as shown next.
Figure 67
Advanced Application > Broadcast Storm Control
The following table describes the labels in this screen.
Table 36
Advanced Application > Broadcast Storm Control
LABEL
DESCRIPTION
Active
Select this check box to enable traffic storm control on the Switch. Clear this check box to
disable this feature.
disable this feature.
Port
This field displays a port number.