ZyXEL Communications MES3500-24 Benutzerhandbuch
Chapter 28 VLAN Mapping
MES3500-24/24F User’s Guide
238
28.2 Enabling VLAN Mapping
Click Advanced Application and then VLAN Mapping in the navigation panel to display the
screen as shown.
screen as shown.
Figure 130
VLAN Mapping
The following table describes the labels in this screen.
Table 88
VLAN Mapping
LABEL
DESCRIPTION
Active
Select this option to enable VLAN mapping on the Switch.
Port
This field displays the port number.
*
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable the VLAN mapping feature on this port. Clear this check box to
disable the VLAN mapping feature.
disable the VLAN mapping feature.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
if it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.