ZyXEL Communications 1000 Benutzerhandbuch

 Chapter 52 File Manager

ZyWALL USG 1000 User’s Guide

Note: The Web Configurator is the recommended method for uploading firmware. You 

only need to use the command line interface if you need to recover the 
firmware. See the CLI Reference Guide for how to determine if you need to 
recover the firmware and how to recover it.

Find the firmware package at www.zyxel.com in a file that (usually) uses the 
system model name with a .bin extension, for example, “zywall.bin”. 

The ZyWALL’s firmware package cannot go through the ZyWALL when you enable 
the anti-virus Destroy compressed files that could not be decompressed 
option. The ZyWALL classifies the firmware package as not being able to be 
decompressed and deletes it. You can upload the firmware package to the ZyWALL 
with the option enabled, so you only need to clear the Destroy compressed files 
that could not be decompressed option while you download the firmware 
package. See 

 for more on the anti-virus Destroy 

compressed files that could not be decompressed option. 

Figure 563   Maintenance > File Manager > Firmware Package     

The following table describes the labels in this screen.  

Table 250   Maintenance > File Manager > Firmware Package

Boot 
Module

This is the version of the boot module that is currently on the ZyWALL.

Current 
Version

This is the firmware version and the date created. 

Released 
Date

This is the date that the version of the firmware was created. 

File Path  Type in the location of the file you want to upload in this field or click Browse 

... to find it.

Browse...  Click Browse... to find the .bin file you want to upload. Remember that you 

must decompress compressed (.zip) files before you can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two 
minutes.