ZyXEL Communications 200 Series Benutzerhandbuch
Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
166
Figure 121 Device HA > Active-Passive Mode: Backup ZyWALL Example
5 Click the General tab. Turn on device HA and click Apply.
Figure 122 Device HA > General: Master ZyWALL Example
6.9.4 How to Deploy the Backup ZyWALL
Connect ZyWALL B’s lan1 interface to the LAN1 network. Connect ZyWALL B’s wan1
interface to the same router that ZyWALL A’s wan1 interface uses for Internet access.
ZyWALL B copies A’s configuration (and resychronizes with A every hour). If ZyWALL A
fails or loses its lan1 or wan1 connection, ZyWALL B functions as the master.
interface to the same router that ZyWALL A’s wan1 interface uses for Internet access.
ZyWALL B copies A’s configuration (and resychronizes with A every hour). If ZyWALL A
fails or loses its lan1 or wan1 connection, ZyWALL B functions as the master.
6.9.5 How to Check Your Device HA Setup
1 To make sure ZyWALL B copied ZyWALL A’s settings, you can log into ZyWALL B’s
management IP address (192.168.1.5) and check the configuration. You can use the