ZyXEL Communications 200 Series Benutzerhandbuch

Seite von 902
 Chapter 43 System
ZyWALL USG 100/200 Series User’s Guide
675
The following table describes the labels in this screen.
 
43.5.8  MX Record 
A MX (Mail eXchange) record indicates which host is responsible for the mail for a particular 
domain, that is, controls where mail is sent for that domain. If you do not configure proper MX 
records for your domain or other domain, external e-mail from other mail servers will not be 
able to be delivered to your mail server and vice versa. Each host or domain can have only one 
MX record, that is, one domain is mapping to one host.
43.5.9  Adding a MX Record 
Click the Add icon in the MX Record table to add a MX record.
Figure 493   System > DNS > MX Record Add
The following table describes the labels in this screen.
 
Table 235   System > DNS > Domain Zone Forwarder Add
LABEL
DESCRIPTION
Domain Zone 
A domain zone is a fully qualified domain name without the host. For example, 
zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully qualified domain 
name. For example, whenever the ZyWALL receives needs to resolve a 
zyxel.com.tw domain name, it can send a query to the recorded name server IP 
address.
Enter * if all domain zones are served by the specified DNS server(s). 
DNS Server
Select DNS Server(s) from ISP if your ISP dynamically assigns DNS server 
information. You also need to select an interface through which the ISP provides 
the DNS server IP address(es). The interface should be activated and set to be a 
DHCP client. The fields below display the (read-only) DNS server IP address(es) 
that the ISP assigns. N/A displays for any DNS server IP address fields for which 
the ISP does not assign an IP address.
Select Public DNS Server if you have the IP address of a DNS server. Enter the 
DNS server's IP address in the field to the right. The ZyWALL must be able to 
connect to the DNS server without using a VPN tunnel. The DNS server could be 
on the Internet or one of the ZyWALL’s local networks. You cannot use 0.0.0.0.
Select Private DNS Server if you have the IP address of a DNS server to which 
the ZyWALL connects through a VPN tunnel. Enter the DNS server's IP address in 
the field to the right. You cannot use 0.0.0.0.
OK
Click OK to save your customized settings and exit this screen. 
Cancel
Click Cancel to exit this screen without saving
Table 236   System > DNS > MX Record Add
LABEL
DESCRIPTION
Domain Name
Enter the domain name where the mail is destined for.
IP Address/FQDN
Enter the IP address or fully qualified domain name of a mail server that handles 
the mail for the domain specified in the field above.