Technicolor - Thomson ST536 Benutzerhandbuch

E-DOC-CTC-20061027-0003 v2.0

IP Commands

addrcheck

Set the level of IP address checks. 
Choose between:

: No address checking is performed. For advanced users only; 

in normal circumstances there should always be some kind of 
address checking.

: Minimum level of checking.

Only the address configuration on the Thomson ST is checked.

: Checking of the address configuration of the Thomson ST 

and also of traffic: addresses of incoming packets; this checking 
is related to constants (for example an address may not be 
entirely composed of one‘s or zero‘s).

: Besides the address configuration of the Thomson ST 

itself, and besides the checking of traffic on a constants level, 
additional checking is performed on the IP addresses that are 
determined by the configuration, more specifically by the 
network.

The default is 

.

OPTIONAL

mssclamping

Disable or enable mss clamping for low MTU interfaces.
Enabling mss clamping assures that the size of a TCP packet never 
exceeds the available Maximum Transmission Unit (MTU) of the 
outgoing interface.
The default is 

.

It is recommended not to disable this parameter.

OPTIONAL

natloopback

Disable/Enable NAT loopback.
The default is 

.

OPTIONAL

loadbalancing

Select loadbalancing mechanism

OPTIONAL

bitrate-
window(sec)

A number between 10 and 3600.
Set the window to calculate the bitrate (multiple of 10).
The default is 

.

OPTIONAL

acceleration

Disable/Enable IP acceleration

OPTIONAL

=>ip config
Forwarding enabled
Sendredirects enabled
IP options enabled
NetBroadcasts disabled
Default TTL 64
Fraglimit 64 fragments
Fragcount currently  0 fragments
Defragment mode : enabled
Address checks : dynamic
Mss Clamping : enabled
NAT Loopback : enabled
Bitrate window (sec), multiple of 10 : 30
=>