Technicolor - Thomson 536(v6) Benutzerhandbuch

E-DOC-CTC-20051017-0142 v1.0

Getting to know your SpeedTouch™

1.2.3 Access via FTP

To access the

SpeedTouch™ via the
File Transfer Protocol

(FTP)

You can access the file system of the SpeedTouch™ via the File Transfer Protocol 
(FTP), in order to:

Restore or back up configuration files, templates or language packs.

Upgrade your configuration.

File system

The SpeedTouch™ file system is stored on non-volatile memory and contains the 
SpeedTouch™ software, service template files and (optionally) default setting files. 

To open an FTP session

Proceed as follows: 

Open a Command Prompt window.

At the prompt, type 

 followed by the IP address of your SpeedTouch™ 

(192.168.1.254 by default).

Enter your SpeedTouch™ security user name and password.

The example below shows an FTP session to the SpeedTouch™ file system. 

File system structure

The structure of the file system is very simple: it consists of a single root directory 
called 

 and a subdirectory called 

 (download). 

The 

 directory contains:

all the necessary files for the SpeedTouch™ to start correctly

the dl directory

The 

 directory contains the software image.  

In Microsoft Windows XP for instance: 

On the Windows taskbar, click Start.

Select

 (

. 

The default user is ‘Administrator’ and the default password is blank.

If you made changes to the SpeedTouch™ configuration and saved 
them, a user.ini configuration settings file is created in the 

 

subdirectory.