Technicolor - Thomson 536(v6) Benutzerhandbuch
51
E-DOC-CTC-20051017-0142 v1.0
Chapter 4
SpeedTouch™ Web Interface
4.5.4 Game or Application Definition
Accessing the Game or
Application Definition
page
Proceed as follows to access the Game or Application Definition page:
1
In the Toolbox menu, click Game & Application Sharing.
2
In the Pick a task list, click Modify a game or application.
3
Click the name of the game or application you want to view/change.
Overview
This page gives you an overview of the port mappings used to allow this service or
game to be initiated from the Internet.
game to be initiated from the Internet.
A service consists of one or more TCP/UDP port ranges. Each incoming port range
can be translated into a different internal (local network) port range. Port ranges can
be statically assigned to devices or dynamically assigned using an outgoing trigger.
can be translated into a different internal (local network) port range. Port ranges can
be statically assigned to devices or dynamically assigned using an outgoing trigger.
Configure
Under:
Game or Application Name you can:
Change the name of the game or application.
Change the name of the game or application.
Game or Application Definition you can:
Change the TCP/UDP port definition for this game or application.
Change the TCP/UDP port definition for this game or application.
Adding a Port
Translation rule
Proceed as follows:
1
Click the Edit link of the TCP/UDP port definition of the game or application.
2
In the Protocol list, click the protocol the game or application uses.
3
In the Port Range box, type the port range the game or application uses.
4
In the Translate To box, type the port range to which the SpeedTouch™ has to
translate the ports specified under Port Range.
translate the ports specified under Port Range.
5
If you want to make a dynamic translation rule you must specify a trigger
protocol and port.
protocol and port.
6
Click Apply.
Consult the user’s guide or support pages of your application to know which
ports are being used by this application.
ports are being used by this application.
As soon as the SpeedTouch™ receives outgoing traffic on this trigger
port, it will activate this translation rule.
port, it will activate this translation rule.