Technicolor - Thomson 536(v6) Benutzerhandbuch
77
E-DOC-CTC-20051017-0142 v1.0
Chapter 4
SpeedTouch™ Web Interface
4.6.5 Interface Settings
Overview
The Overview page gives you an overview of the current interface settings.
Configure
The Configure page allows you to:
Change the IP address settings of the SpeedTouch™.
Change the DHCP IP address pool settings.
Assigning a new IP
address to the
SpeedTouch™
Under IP Addresses, proceed as follows:
1
Type the IP address of your choice (for example 192.168.1.1) in the left text
box.
box.
2
Type subnet mask (for example 255.255.255.0) in the right text box.
3
Click Add.
Network devices using the same subnet mask can now access the
SpeedTouch™ using this IP address.
SpeedTouch™ using this IP address.
!
Before changing the DHCP pools, make sure that at least one IP
address of the SpeedTouch™ uses the same subnet as the IP
addresses in the DHCP pools.
address of the SpeedTouch™ uses the same subnet as the IP
addresses in the DHCP pools.