Technicolor - Thomson 545/570 Benutzerhandbuch
1 SpeedTouch™ Installation
E-DOC-CTC-20030814-0001 v1.0
19
1.3.2 Operating System Independent SpeedTouch™
Configuration Setup
Supported Systems
As the SpeedTouch™ is OS-independent, this configuration setup can be used by any
computer system.
computer system.
Prerequisites
Make sure that:
•
The SpeedTouch™ device is correctly set up and turned on as described in
.
•
The SpeedTouch™ device is in its default configuration state.
See
See
for resetting your
device.
•
If you want to configure the SpeedTouch™ over the wireless network, the
computer’s WLAN client is installed and correctly associated with the Speed-
Touch™ wireless network according to
computer’s WLAN client is installed and correctly associated with the Speed-
Touch™ wireless network according to
.
•
The computer’s Operating System supports TCP/IP and it’s Ethernet interface is
configured for obtaining its IP configuration dynamically.
configured for obtaining its IP configuration dynamically.
Note
In case of problems with DHCP you can also configure the computer’s
Ethernet interface with a static Net10 private IP address, e.g. 10.0.0.1,
10.0.0.2, but make sure NOT to use the 10.0.0.138 IP address as this is
the default IP address of the SpeedTouch™.
Ethernet interface with a static Net10 private IP address, e.g. 10.0.0.1,
10.0.0.2, but make sure NOT to use the 10.0.0.138 IP address as this is
the default IP address of the SpeedTouch™.
•
Your web browser is able to run Java scripts.
SpeedTouch™
Easy Setup
SpeedTouch™ Easy Setup consists of two parts:
•
•
(if needed)