Westell Technologies 36R566 Benutzerhandbuch
Installation/User Guide
Model # –WebShare
Part # – 030-300109
Rev C
Revision Date – 09/2000
2000 Westell, Inc.
Printed in the USA
030-300109C
35
This window displays the local Ethernet characteristics including the IP address, subnet mask, DNS proxy IP
addresses, and the state of the DHCP server, as shown in Figure 31.
addresses, and the state of the DHCP server, as shown in Figure 31.
These parameters are stored and remain in WebShare until changed, or the default values are reset with the ‘IP
Discovery and Default Reset’ Utility. See Section 7.2.
Discovery and Default Reset’ Utility. See Section 7.2.
WARNING
If the IP address is changed, WebShare will not respond to the default IP address of
192.168.0.1. Be sure to change the URL to the new IP address when accessing the
management pages.
192.168.0.1. Be sure to change the URL to the new IP address when accessing the
management pages.
Figure 31. LAN Advanced Configuration Dialog Box
8.1.4.2 Router IP Discovery and Factory Default Reset
To return Ethernet characteristics to the factory default, Select Start > Programs > WebShare Utilities >
WebShare IP Discovery and Default Reset.
To return Ethernet characteristics to the factory default, Select Start > Programs > WebShare Utilities >
WebShare IP Discovery and Default Reset.