HP (Hewlett-Packard) T1453-90001 Benutzerhandbuch
Overview of Installation and Configuration
Setting 802.1p Priority, ToS, and Overrides
Chapter 2
35
Setting 802.1p Priority, ToS, and Overrides
802.1p priority is the priority in the tag in the frame header. Switches
can use the 802.1p priority.
can use the 802.1p priority.
ToS is the IP precedence in the IP header. Switches ignore ToS. Routers
may use it.
may use it.
The Priority Override Levels for Outbound Traffic are as follows:
CONF_PRI
Your specified priority will be used.
IP_HEADER
IP header ToS will be converted to 802.1p priority.
CONF_TOS
Your specified ToS value will be converted to 802.1p
priority according to the values shown in Table 2-1.
priority according to the values shown in Table 2-1.
The ToS Override Levels for Inbound Traffic are as follows:
IP_HEADER
ToS value in the IP header will be used.
ETHER_HEADER Ether header 802.1p priority will be
converted to ToS value.
CONF_TOS
ToS specified by user will used.
CONF_PRI
Your specified 802.1p priority will be converted
to ToS.
to ToS.
Where to Get More Information
For information on using the
lanadmin
command to temporarily modify
HP-UX VLANs (between reboots), type:
man vlan
.