ZyXEL Communications Draft 802.11n Wireless CardBus Card Benutzerhandbuch

ZyXEL NWD-170N User’s Guide

48

Chapter 4 Wireless Configuration

The following table describes the labels in this screen. 

3 If you selected Infrastructure network type in the first screen, select WEP, WPA, 

WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data 
encryption. If you selected Ad-Hoc network type in the first screen, you can use only 
WEP encryption method. Otherwise, select DISABLE to allow the NWD-170N to 
communicate with the access points or other peer wireless computers without any data 
encryption, and skip to step

 5

.

Figure 30   Profile: Wireless Settings 

4 The screen varies depending on the encryption method you select in the previous screen. 

The settings must be exactly the same on the APs or other peer wireless computers as 
they are on the NWD-170N. Refer to 

 for detailed information on 

wireless security configuration.

Table 15   Profile: Wireless Settings 

Wireless Settings

Wireless Mode

This is the wireless standard the NWD-170N uses. In Ad-Hoc mode, you can use 

only 802.11g.

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc 

network, you must use the same channel as the peer computer.