Cisco Systems 511 Benutzerhandbuch
1-17
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 1 Introducing the Content Engine
Specifications
Specifications
summarizes the features and specifications for the CE-511 and
CE-566.
6
Red
7
Green
8
Ground
Table 1-9
VGA Output Connector Pinout (continued)
Pin Number
Destination
Table 1-10
CE-511 and CE-566 Hardware Specifications
Specification
Description
Microprocessor
1 Intel 2.8-GHz Celeron 256-KB with Level 2 cache
and multimedia extensions (MMX2) technology
and multimedia extensions (MMX2) technology
Expansion bays
Two 3.5-in. (8.89-cm) slim-height bays for hard
disk drives
disk drives
Expansion slots
Two 66-/100-/133-MHz 64-bit PCI-X slots on the
system board (half-length full-height slots; one
low-profile and one full profile)
system board (half-length full-height slots; one
low-profile and one full profile)
Hard disk controller
•
CE-511—Serial advanced technology attachment
(ATA) controller
(ATA) controller
•
CE-566—Ultra320 SCSI controller
Adapters
•
1-port Fibre Channel adapter
•
1-port MPEG A/V decoder adapter
Note
The CE-511 and CE-566 support either the
Fibre Channel adapter or the MPEG A/V
decoder adapter in PCI slot 1.
Fibre Channel adapter or the MPEG A/V
decoder adapter in PCI slot 1.
•
Ultra320 SCSI adapter installed in PCI slot 2
(CE-566 only)
(CE-566 only)