Cyclades ACS48 Benutzerhandbuch

22

To send a break to the terminal, click on the SndBreak button.

The upper right hand corner of the browser (Java window) shows two icons: 
Refresh and Disconnect.

Select the left icon to refresh or reconnect to the server; select the right icon to 
end the session or disconnect from the Java window.

To open a telnet session to a serial port, enter the following command:

telnet

 <hostname or IP address> <TCP port number>   

Press ENTER

Where:

<hostname> is the hostname configured in the workstation where the telnet 
client will run (through /etc/hosts or DNS table). Or it can just be the IP 
address of the AlterPath ACS (Ethernet's interface) as configured by the user 
or as learned from DHCP.

<TCP port number> is the number associated to the serial port. The factory 
values, 7001 corresponds to serial port 1, 7002 to serial port 2 and so forth, 
and 3000 is a pool with all serial ports.

To close the telnet session, just press the telnet hot key configured in the telnet 
client application (usually it's "Ctrl-]"). 

Secure Shell (SSH) is a command interface and protocol often used by 
network administrators to connect securely to a remote computer. SSH 
replaces its non-secure counterpart rsh and rlogin. There are two versions of 
the protocol, ssh and ssh2. The AlterPath Console Server offers both.