Apple bCool XG1 Benutzerhandbuch

•

Place the projector on a stable, level surface, out of direct sunlight and away from sources of
excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields.

•

Allow sufficient cooling of the product by keeping all air inlets and outlets clear from
obstructions.

•

Position the projector in such way that the viewers cannot watch into the projector light beam.

•

Choose a screen size suitable for the number of viewers and the size of the room.

•

Picture quality is best when you sit directly in front of the projector screen.

•

The projector can be used for both front projection, rear projection and ceiling projection
applications. As default factory setting, the projector has been set up for front projection.You
can change to rear or ceiling projection via the ‘Mirror’ function in the ‘Setup’ menu.

•

For more information on the projection properties of the projector, check the Projection
Assistant application on the Cd-rom.

Insert the mains lead into the projectors Mains inlet socket and connect it to the wall socket.

–

The Standby indicator lights up red, the projector is now in the Standby mode.

Remove the lens cap.

Press the Standby button on projector or remote control to switch on the projector.

–

The Standby indicator starts blinking green, the projector is now warming up.

–

When the projection lamp is on, the Standby indicator lights up green after the start-up
screen appeared for several seconds.

Press the Standby button twice to switch the projector back into the Standby mode.

–

The Standby Warning screen will appear for 20 seconds.

–

The projector will now go into Standby mode.

To switch off the mains supply completely, disconnect the mains lead.

–

–

English User guide  bCool XG1

SCREEN

SCREEN

SCREEN

SCREEN