Apple bCool XG1 Benutzerhandbuch
Setup adjustments
•
•
Press Menu and select Setup in the menu bar.The following Setup adjustments can now be
made according to the instructions under ‘General explanation’:
– Language
made according to the instructions under ‘General explanation’:
– Language
selects the required menu language;
– Keystone
corrects picture distortion of the vertical keystone type by internal scaling;
– Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
user(s) and the projection screen;
-- Source
selects the current projection source (Auto, Computer, DVI,YPbPr,YCbCr, RGBS, S-Video
or Video). If you select ‘Auto’, the projector will always automatically search for available
input signals.
or Video). If you select ‘Auto’, the projector will always automatically search for available
input signals.
– Factory settings
resets all user settings to the default factory settings;
– Picture Format
selects one of five picture format options (4:3, 16:9, letter box, pan & scan and
4:3 original).
4:3 original).
Due to the scaling of the image when the picture format is changed, it might be possible that a
part of the actual image is missing at the top or the bottom of the screen. With Cursor Control
you can adjust the position of the projected image upwards or downwards.
part of the actual image is missing at the top or the bottom of the screen. With Cursor Control
you can adjust the position of the projected image upwards or downwards.
– Volume
adjusts the sound level;
– System information
the System Information sub menu contains an overview of the most relevant projector
settings, including information on the hardware and software configuration;
settings, including information on the hardware and software configuration;
-- Feedback
To suppress OSD messages. Warning or error messages however are never suppressed.
-- Lamp counter
To show the operating time of the lamp, which can be reset after a new lamp has been
installed;
installed;
-- SmartDimmer
switches on the power saving mode by reducing the lamp power from 180W to 150W.
When SmartDimmer is switched on (150W), the audible (fan) noise will be reduced and
gray scales in the picture are optimized. When SmartDimmer is switched off (180W),
peak brightness in the picture is obtained. Default setting for data and component sources
(Data in) is Off; default setting for video sources (Video, S-Video) is On.
When SmartDimmer is switched on (150W), the audible (fan) noise will be reduced and
gray scales in the picture are optimized. When SmartDimmer is switched off (180W),
peak brightness in the picture is obtained. Default setting for data and component sources
(Data in) is Off; default setting for video sources (Video, S-Video) is On.
Philips Multimedia Projector
23
English User guide bCool XG1
5. Operation
On Screen Display Menu <
Temp.
OK
Menu
Source
Auto Image
Lamp
Temp.
OK
Menu
Source
Auto Image
Lamp