Benq W1200 Benutzerhandbuch
Operation
28
i. If the password is correct, the OSD menu returns to the Security Settings page
with 'Off'shown in the row of Power on Lock. You will not have to enter the
password next time you turn on the projector.
password next time you turn on the projector.
ii. If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'INPUT PASSWORD' displays for your retry. You can
press MENU/EXIT to cancel the change or try another password.
press MENU/EXIT to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
you ever need to re-activate the password function by entering the old password.
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time. When starting up, the projector automatically searches for
the available signals.
display one full screen at a time. When starting up, the projector automatically searches for
the available signals.
Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of
this projector) if you want the projector to automatically search for the signals.
this projector) if you want the projector to automatically search for the signals.
You can also manually cycle through the available
input signals.
input signals.
1.
Press SOURCE on the projector. A source
selection bar displays.
selection bar displays.
2.
Press
/
until your desired signal is
selected and press MODE/ENTER. You may
press Source selection keys on remote control.
Once detected, the selected source information will display on the screen for seconds.
If there is multiple equipment connected to the projector, repeat steps 1-2 to search for
another signal.
press Source selection keys on remote control.
Once detected, the selected source information will display on the screen for seconds.
If there is multiple equipment connected to the projector, repeat steps 1-2 to search for
another signal.
•
The brightness level of the projected image will change accordingly when you switch
between different input signals. Data (graphic) "PC" presentations using mostly static
images are generally brighter than "Video" using mostly moving images (movies).
between different input signals. Data (graphic) "PC" presentations using mostly static
images are generally brighter than "Video" using mostly moving images (movies).
•
The input signal type effects the options available for the Picture Mode. See
for details.
•
The native display resolution of this projector is in a 16:9 aspect ratio. For best display
picture results, you should select and use an input signal which outputs at this resolution.
Any other resolutions will be scaled by the projector depending upon the 'aspect ratio'
setting, which may cause some image distortion or loss of picture clarity. See
picture results, you should select and use an input signal which outputs at this resolution.
Any other resolutions will be scaled by the projector depending upon the 'aspect ratio'
setting, which may cause some image distortion or loss of picture clarity. See
for details.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color space
to YUV.
HDMI input and the projected picture displays wrong colors, please change the color space
to YUV.
1.
Press MENU/EXIT and then press
/
until the DISPLAY menu is highlighted.
2.
Press
to
highlight
SOURCE and press MODE/ENTER.
3.
Press
to
highlight
Color Space Conversion and press
/
to select a suitable
color space.
This function is only available when the HDMI input port is in use.