Benq MX505 Benutzeranleitung

Connection

16

• 

If you wish to use this connection method when the projector is in standby mode, make sure the 

Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See 

 for details.

Connecting video source devices

You need only connect the projector to a video source device using just one of the 

connecting methods, however each provides a different level of video quality. The method 

you choose will most likely depend upon the availability of matching terminals on both the 

projector and the video source device as described below:

Connecting audio

The projector has built-in mono speaker(s) which are designed to provide basic audio 

functionality accompanying data presentations for business purposes only. They are not 

designed for, nor intended for stereo audio reproduction use as might be expected in 

home theater or home cinema applications. Any stereo audio input (if provided), is mixed 

into a common mono audio output through the projector speaker(s).

The built-in speaker(s) will be muted (except for the Power On/Off Ring Tone) when 

the AUDIO OUT jack is connected.

• 

The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See 

 for details.

• 

If the selected video image is not displayed after the projector is turned on and the correct video source 

has been selected, check that the video source device is turned on and operating correctly. Also check 

that the signal cables have been connected correctly.

Better

Good

Normal