Benq MX505 Benutzeranleitung

Operation

30

4.

Press  

to 

highlight 

Timer Position and set the timer position by pressing 

/

.

5.

Press   to highlight Timer Counting Direction and select your desired counting 
direction by pressing 

/

.

6.

Press  

to 

highlight 

Sound Reminder and decide if you want to activate sound 

reminder by pressing 

/ . If you select On, a double beep sound will be heard at 

the last 30 seconds of counting down/up, and a triple beep sound will be produced 
when the timer is up.

7.

To activate the presentation timer, press   and press 

/

 to highlight On and 

press MODE/ENTER.

8.

A confirmation message appears. Highlight Yes and press MODE/ENTER on the 
projector or remote control to confirm. You will see the message “Timer is On” 
displaying on the screen. The timer starts counting when the timer is on.

To cancel the timer, perform the following steps:

1.

Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight 
Off. Press MODE/ENTER. A confirmation message appears.

2.

Highlight Yes and press MODE/ENTER to confirm. You will see the message 
“Timer is Off” displaying on the screen. 

Remote paging operations

Connect the projector to your PC or notebook with a USB cable prior to using the paging 

function. See 

for details.

You can operate your display software program (on a connected PC) which responds to 

page up/down commands (like Microsoft PowerPoint) by pressing Page Up/Page Down 

on the remote control.

If remote paging function doesn't work, check if the USB connection is correctly made and 

the mouse driver on your computer is updated to the latest version.

The remote paging function cannot work with Microsoft

®

 Windows

®

98 operating system. Windows

®

XP or 

higher operating systems are recommended.

Freezing the image

Press Freeze on the remote control to freeze the image. The word “FREEZE” will 

display in the upper left corner of the screen. To release the function, press any key on the 

projector or remote control.

If your remote control has the following keys, please note that they cannot be pressed to release the function: 

LASER, #1, #4, Page Up/Page Down, NETWORK, NETWORK SETTING. 

Even if an image is frozen on the screen, the pictures are running on the video or other 

device. If the connected devices have active audio output, you will still hear the audio even 

though the image is frozen onscreen.

Count Up

Increases from 0 to the preset time.

Count Down

Decreases from the preset time to 0.