Ricoh PJ S2130 Benutzerhandbuch

2

English

 

■ 

Warning-

This apparatus must be earthed.

■ 

Warning-

Do not look into the projector’s lens when the 

lamp is on.  The bright light may hurt your eyes.

■ 

Warning-

To reduce the risk of fire or electric shock, do not 

expose this projector to rain or moisture.

■ 

Warning-

Please do not open or disassemble the projector 

as this may cause electric shock.

■ 

Warning-

When replacing the lamp, please allow unit to 

cool down, and follow all replacement instruc-

tions..

■ 

Warning-

This projector will detect the life of the lamp 

itself.  Please be sure to change the lamp when it 

shows warning messages.

■ 

Warning-

When switching the projector off, please ensure 

the cooling cycle has been completed before 

disconnecting power. Allow 60 seconds for the 

projector to cool down.

■ 

Warning-

Do not use lens cap when projector is powered 

on.

■ 

Warning-

Turn on the projector first and then the signal 

sources.

■ 

Warning-

When the lamp reaches the end of its life, it will 

burn out and may make a loud popping sound. 

If this happens, the projector will not turn back 

on until the lamp module has been replaced. To 

replace the lamp, follow the procedures listed 

under “Replacing the Lamp”.

■ 

Warning-

Do not remove the cabinet cover, or you may be 

exposed to dangerous voltage. Refer servicing to 

qualified service personnel only.