Sanyo PLC-XW56 Benutzerhandbuch

Basic Operation

Press the POWER ON/STAND-BY button on

the top control or on the remote control, and a

message "Power off?" appears on the screen.
Press the POWER ON/STAND-BY button again

to turn off the projector. The POWER indicator

starts to blink red, and it continues while the

cooling fans are operating for about 10 seconds.

(You can select the level of fan quietness and

rotation speed. See page 50.)

At this time you can disconnect the AC power

cord even if the fans are still running.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

When the projector has cooled down enough to

be turned on again, the POWER indicator lights

red.

Turning Off the Projector



Note:

• When the On start function is on, this projector

is turned on automatically by connecting the AC

power cord to an AC outlet. (p.47)

• The running speed of cooling fans is changed

according to the temperature inside the projector.

• Do not put the projector in a case before the

projector is cooled enough.

• If the WARNING indicator blinks or emits a red

light, see "Warning Indicator" on page 51.

• While the POWER indicator is blinking, lamp

is being cooled down and the projector cannot

be turned on. Wait until the POWER indicator

becomes red to be turned on again.

• The fan rotation will terminate directly if the AC

power cord is unplugged immediately after the

projector is turned off.

• The projector can be turned on after the POWER

indicator turns red. The waiting time to restart

will be shortened when the normal power-

off processing for fan cooling is completed,

compared with the time the AC power cord is

immediately unplugged after the power-off.

The message disappears after 4 seconds.

D O N O T O P E R A T E T H E P R O J E C T O R

CONTINUOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET

STAND FOR ABOUT AN HOUR IN EVERY 4

HOURS.