Sanyo PLC-HP7000L Benutzerhandbuch

12

① ON/STAND-By button

  Turn the projector on or off (pp.23–24).

③ MENU button

  Open or close the On-Screen Menu (p.25).

④ Point ▲▼◄► buttons

  – Select an item or adjust the value in the 

On-Screen Menu (p.25).

  – Pan the image in Digital zoom + mode (p.44).

⑫ WARNING TEMP . indicator

  Blink red when the internal temperature of the 

projector exceeds the operating range (pp.77, 

85-87).

⑤ SHUTTER button

    Close and open up the built-in shutter. (p.27)

⑧ POWER indicator

  – Light when in stand-by mode and during 

operations.

  – Blink in the Power management mode (p.63).

⑥ SELECT button

  – Execute the selected item (p.25).

  – Expand or compress the image in the Digital 

zoom mode (p.44).

⑨ LAMP/SHUTTER indicator

  Light red during operations.

  Light blue when the shutter is closed (p.85).

⑩ LAMP REPLACE indicator

  Light orange when the projection lamp reaches 

its end of life (pp.74, 84).

⑪ WARNING FILTER indicator

  – Blink slow when the filter is being scrolled (pp. 

71, 85). 

  – Blink fast when the filter scroll is not working 

properly or the filter cartridge is not installed 

(pp.71, 87).

  – Light orange when the clogging of the filter is 

detected or the filter counter reaches a time 

set in the timer setting, urging immediate filter/ 

filter cartridge replacement (pp.70, 71, 87).

② INPUT button

  Select an input source (pp.32–34).

⑦ LENS button

  Enter the focus, zoom, and lens shift adjustment 

mode (p.27).

⑥

⑤

⑦

①

②

④

③

⑨

⑧

⑩

⑪

⑫