Sanyo PLC-WXU700 Benutzerhandbuch

To the Owner

CAUTION:

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK) . NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT .
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL .

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE OWNER'S MANUAL

WITH THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing and operating this projector, read this

manual thoroughly.

This projector provides many convenient features and

functions. Operating the projector properly enables

you to manage those features and maintains it in good

condition for many years to come.

Improper operation may result in not only shortening the

product-life, but also malfunctions, fire hazard, or other

accidents.

If your projector seems to operate improperly, read this

manual again, check operations and cable connections

and try the solutions in the “Troubleshooting” section on

pages 69-72 of this manual. If the problem still persists,

contact the dealer where you purchased the projector or

the service center.

Safety Precaution

CAUTION

DO NOT SET THE PROjECTOR IN GREASy, WET, OR
SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN OR A DISASTER . IF THE PROjECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAy
BECOME DETERIORATED .

READ AND KEEP THIS OWNER'S MANUAL FOR
LATER USE .

WARNING: ● THIS APPARATUS MUST BE EARTHED.
● TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE .

– This projector produces intense light from the projection

lens. Do not stare directly into the lens, otherwise eye

damage could result. Be especially careful that children

do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may

result in fire hazard.

– Allowing the proper amount of space on the top, sides,

and rear of the projector cabinet is critical for proper

air circulation and cooling of the unit. The dimension

shown here indicate the minimum space required.

If the projector is to be built into a compartment or

similarly enclosed, these minimum distances must be

maintained.

– Do not cover the ventilation slot on the projector. Heat

build-up can reduce the service life of your projector,

and can also be dangerous.

– If the projector is unused for an extended time, unplug

the projector from the power outlet.

–Do not project the same image for a long time. The

afterimage may remain on the LCD panels by the

characteristic of panel.

SIDE and TOP

REAR

CAUTION

Not for use in a computer room as defined in the Standard

for the Protection of Electronic Computer/Data Processing

Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle

que définie dans la norme ANSI/NFPA 75 Standard

for Protection of Electronic Computer/Data Processing

Equipment.

The symbol mark and recycling systems described below

apply to EU countries and do not apply to countries in other

areas of the world.
Your product is designed and manufactured with high quality

materials and components which can be recycled and/or

reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end-oflife,

should be disposed of separately from your household

waste.
Note:
If a chemical symbol is printed beneath the symbol mark,

this chemical symbol means that the battery or accumulator

contains a heavy metal at a certain concentration. This will

be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems

for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment
we live in!

0.7’(20cm)

1.5’(50cm)

3’(1m)

20cm

50cm