Sanyo PLC-WXE46 Benutzerhandbuch

Select Video by pressing the INPUT button on the top 

control or the VIDEO button on the remote control.

Before using  INPUT or VIDEO button, select the correct 

input source through menu operation as described below.

Use the MENU button to display the On-Screen Menu. 

Press the Point ◄► buttons to move the red frame 

pointer to the Input Menu icon.
Use the Point ▲▼ buttons to move the red arrow 

pointer to Video and then press the SELECT button to 

display the Source Select Menu . 

Move the pointer to the 

desired source and press 

the SELECT button.

Move the pointer to the desired source and then press 

the SELECT button.

When selecting “Auto,” the projector 

automatically detects the incoming video signal, 

and adjusts itself to optimize its performance. 

The projector selects connection in the following 

order:

1. S-video

2. Video 

When the video input signal is connected to the 

VIDEO jack, select Video.

When the video input signal is connected to the 

S-VIDEO jack, select S-video.

Input Menu icon



   • Computer 2 is not displayed when the COMPUTER IN 

2/MONITOR OUT terminal is set as Monitor out (p.44). 

   •When the Input Search function is set On1 or On2, the  

   input signal will be searched automatically (p.44).

Move the pointer to Video and 

press the SELECT button.

*See Notes at the bottom of this page.