Sanyo PLC-WXE46 Benutzerhandbuch

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning

cloth. When it is heavily soiled, use a small amount of mild

detergent and finish with the cleaning cloth. Avoid excessive

use of cleaner. Abrasive cleaners, solvents, or other harsh

chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an

appropriate case to avoid dust and being scratched.

Unplug the AC power cord before cleaning.

First, remove the dust with a blower. Then gently wipe the

lens surface. Use a lens cleaning paper moistened with

methyl alcohol (methanol). Avoid excessive use of cleaner.

Do not use abrasive cleaners, solvents, or other harsh

chemical cleaners to avoid damages the lens.

When the projector is not in use, replace the lens cover.

This projector is equipped with a plastic lens.

Do not rub the lens with a hard fiber cloth or hit it with something hard to prevent the lens from scratching.

Do not use a chemical cleaner (liquid and solid) to avoid deteriorating the lens.

When moving the projector or while it is not in use, replace

the lens cover.

Thread the string through the hole on the lens cover

and then tie a knot in the string to secure it in place.

Thread the other end of the string through the hole on

the bottom of the projector. Then pass the lens cover

through the resulting loop of the string and pull it to

tighten the knot.