Sanyo PLC-WU3800 Betriebsanweisung

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that 

contains a small amount of non-abrasive camera lens 

cleaner or use a lens cleaning paper or commercially 

available air blower to clean the lens. 

Avoid using an excessive amount of cleaner. Abrasive 

cleaners, solvents or other harsh chemicals might scratch 

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. 

When the cabinet is heavily soiled, use a small amount of 

mild detergent and finish with a soft dry cleaning cloth. Avoid 

using an excessive amount of cleaner. Abrasive cleaners, 

solvents or other harsh chemicals might scratch the surface 

of the cabinet.

When the projector is not in use, put the projector in 

an appropriate carrying case to protect it from dust and 

scratches.

When moving this projector or while not using it over an

extended period of time, replace the lens cap.

Attach the lens cap according to the following procedures.

1    Pass the string through a hole of the lens cap.

 2    Turn over the projector and remove the screw with a

        screwdriver.

Lens Cap 

String for the lens cap

Secure  it  to  the  hole 

with a screw.

Hole

 3   Attach the string with lens cap to a hole at the bottom of

      the projector and secure it with a screw.

Do  not  use  any  flammable  solvents  or  air  sprays  on  the 

projector and in its vicinity. The explosion or fire hazard may 

occur even after the AC power cord is unplugged because 

the temperature inside the projector is extremely high due to 

the lamps. In addition, there is a risk that the internal parts 

may  be  damaged  not  only  by  the  flammable  air  spray  but 

also by the cold air.