Texas Instruments DU9000 Benutzerhandbuch

®

 

RS-232 Command

This controller supports projectors with a RS-232 serial interface. There are two types of serial commands:

•  Operation command: Available menu options are INPUT, PICTURE, LAMP, ALIGNMENT, CONTROL, 

SERVICE, and OTHERS.

•  Simulated IR remote controller commands: Controls projector with serial command analog IR remote con-

troller and its control keys.

You can use the serial control command to input commands for projector control or retrieve its operational 

data through Windows client terminal software, e.g. Hyper Terminal, with ASCII characters. You need to set 

up the following communication parameters in advance:

Item

Parameter

Bit per Second

9600

Data Bit

8-bit

Parity

None

Stop Bit

1

Flow Control

None

Port

None

An operation command is prefixed by character "op", followed by control commands and settings separated 

by space blank [SP], and ended by carriage return pair "CR" and "ASCII hex 0D". Syntax of serial control 

commands:

 

 

op 

 

: A constant indicating this is an operation command.

 

[SP]   

: Indicate one blank space.

 

[CR]   

: Indicate the command ending carriage return pair "CR" and "ASCII hex 0D".

 

Setting value  : Settings of operation command

Types of setup strings

Characters of settings Description

Query current setup

?

Question mark "?" indicates querying current setup

Setup

= <settings>

Syntax of settings: Symbol "=" suffixed with setup 

values

Increase setup order of 

adjustment items

+

Some settings are changed in steps. Symbol "+" 

indicates changing one step up

Decrease setup order of 

adjustment items

-

Some settings are changed in steps. Symbol "-" 

indicates changing one step down

Execute operation command

None

Certain operation commands execute after input 

without further setting or regulators.