Texas Instruments DU9000 Benutzerhandbuch

®

 

Control the projector through a network

This projector supports the following remote control functions through a network connection.

•  Control projector through web browser.

•  Control projector with RS-232 control or simulated IR commands via TCP/IP communication protocol.

•  Control projector with PJLink standard commands.

You may connect the projector to a PC, an external integrated video or a control signal transmission box 

through LAN for remote control.

See figure below for connecting the projector to a PC in RJ-45 cable for control. For connection through LAN, 

connect the PC to a hub through to the projector's Digital/Lan port.

You may connect the projector to an external integrated video and control signal transmission box with RJ-

45 cable for concurrent video and networking control signal transmission. Please connect the PC to the input 

end of the transmission box with one RJ-45 cable and the output end of the transmission box to the Digital/

LAN input end of the projector with another RJ-45 cable.

HDMI

HUB